background image

Chapter 26 Billing

UAG4100 User’s Guide

264

26.4.1  The Discount Add/Edit Screen

The 

Discount Add/Edit

 screen allows you to create a new discount level or edit an existing one. 

Click 

Configuration > Billing > Discount

 and then an 

Add

 or 

Edit

 icon to open this screen.

Figure 182   

Configuration > Billing > Discount > Add/Edit  

The following table describes the labels in this screen. 

26.5  The Payment Service General Screen

Use this screen to use a credit card service to authorize, process, and manage credit card 
transactions directly through the Internet. You must register with the supported credit card service 
before you can configure the UAG to handle credit card transactions. Click 

Configuration > Billing 

> Payment Service

 to open the following screen.

Table 121   

Configuration > Billing > Discount > Add/Edit

LABEL

DESCRIPTION

Name

This field displays the conditions of each discount level.

Unit

Set the duration of the billing period that should be reached before the UAG charges users 
at this level.

Price

Define this level’s charge per time unit.

OK

Click 

OK

 to save your changes back to the UAG.

Cancel

Click

 Cancel

 to exit this screen without saving.

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Reviews: