Chapter 27 Printer Manager
UAG4100 User’s Guide
271
27.3 The Printout Configuration Screen
Use this screen to customize the account printout. Click
Configuration > Printer Manager >
Printout Configuration
to open the following screen.
Figure 186
Configuration > Printer Manager > Printout Configuration
Edit
Double-click an entry or select it and click
Edit
to open a screen where you can modify the
entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The UAG confirms you want to remove it
before doing so.
Activate
To turn on an entry, select it and click
Activate
.
Inactivate
To turn off an entry, select it and click
Inactivate
.
#
This field is a sequential value, and it is not associated with any entry.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
IPv4 Address
This field displays the IP address of the printer.
Description
This field displays the descriptive name for the printer.
Printer Firmware
Information
Current Version
This is the version of the printer firmware currently uploaded to the UAG. The UAG
automatically installs it in the connected printers to make sure the printers are upgraded to
the same version.
Apply
Click this button to save your changes to the UAG.
Reset
Click this button to return the screen to its last-saved settings.
Table 124
Configuration > Printer Manager > General (continued)
LABEL
DESCRIPTION