ZyXEL Communications UAG4100 User Manual Download

Page: 330 / 477

Chapter 34 Services

UAG4100 User’s Guide

330

Figure 221

Configuration > Object > Service > Service Group > Edit

The following table describes the labels in this screen.

Table 160

Configuration > Object > Service > Service Group > Edit

LABEL

DESCRIPTION

Name

Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores(

), or dashes (-), but the first character cannot be a number. This value is

case-sensitive.

Description

Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.

Member List

The

Member

list displays the names of the service and service group objects that have

been added to the service group. The order of members is not important.

Select items from the

Available

list that you want to be members and move them to the

Member

list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key

to select multiple entries and use the arrow button to move them.

Move any members you do not want included to the

Available

list.

Click

save your changes back to the UAG.

Cancel

Click

Cancel

to exit this screen without saving your changes.

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands

ZyXEL Communications UAG4100, User Manual

Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands