Chapter 44 Packet Flow Explore
UAG4100 User’s Guide
440
The following table describes the labels in this screen.
Table 213
Maintenance > Packet Flow Explore > Routing Status
LABEL
DESCRIPTION
Routing Flow
This section shows you the flow of how the UAG determines where to route a packet. Click a
function box to display the related settings in the
Routing Table
section.
Routing Table
This section shows the corresponding settings according to the function box you click in the
Routing Flow
section.
The following fields are available if you click
Direct Route
or
Main Route
in the
Routing Flow
section.
#
This field is a sequential value, and it is not associated with any entry.
Destination
This is the destination IP address of a route.
Gateway
This is the IP address of the next-hop gateway or the interface through which the traffic is
routed.
Interface
This is the name of an interface associated with the route.
Metric
This is the route’s priority among the displayed routes.
Flags
This indicates additional information for the route. The possible flags are:
•
A
- this route is currently activated.
•
S
- this is a static route.
•
C
- this is a direct connected route.
•
G
- the route is to a gateway (router) in the same network.
•
!
- this is a route which forces a route lookup to fail.
•
B
- this is a route which discards packets.
•
L
- this is a recursive route.
Persist
This is the remaining time of a dynamically learned route. The UAG removes the route after
this time period is counted down to zero.
The following fields are available if you click
Policy Route
in the
Routing Flow
section.
#
This field is a sequential value, and it is not associated with any entry.
PR #
This is the number of an activated policy route. If you have configured a schedule for the
route, this screen only displays the route at the scheduled time.
Incoming
This is the interface on which the packets are received.
Source
This is the source IP address(es) from which the packets are sent.
Destination
This is the destination IP address(es) to which the packets are transmitted.
Service
This is the name of the service object.
any
means all services.
Source Port
This is the name of a service object. The UAG applies the policy route to the packets sent
from the corresponding service port.
any
means all service ports.
DSCP Code
This is the DSCP value of incoming packets to which this policy route applies. See
for more information.
Next Hop Type This is the type of the next hop to which packets are directed.
Next Hop Info
•
This is the main route if the next hop type is
Auto
.
•
This is the interface name and gateway IP address if the next hop type is
Interface /
GW
.
•
This is the trunk name if the next hop type is
Trunk
.
The following fields are available if you click
VPN
1-1 Mapping Route
in the
Routing Flow
section.
#
This field is a sequential value, and it is not associated with any entry.
Source
This is the original source IP address(es).
any
means any IP address.
Destination
This is the original destination IP address(es).
any
means any IP address.
Outgoing
This is the name of an interface which transmits packets out of the UAG.
Gateway
This is the IP address of the gateway in the same network of the outgoing interface.