Chapter 7 Monitor
UAG4100 User’s Guide
93
7.13 The Radio List Screen
Use this screen to view statistics about the wireless radio transmitters in each of the APs connected
to the UAG. To access this screen, click
Monitor > Wireless > AP Information > Radio List
.
Figure 60
Monitor > Wireless > AP Information > Radio List
The following table describes the labels in this screen.
Table 35
Monitor > Wireless > AP Information > Radio List
LABEL
DESCRIPTION
More
Information
Click this to view additional information about the selected radio’s SSID(s), wireless traffic
and wireless clients. Information spans a 24 hour period.
#
This is the radio’s index number in this list.
AP Description
This displays the description of the AP to which the radio belongs.
Model
This displays the model of the AP to which the radio belongs.
MAC Address
This displays the MAC address of the radio.
Radio
This indicates the radio number on the AP to which it belongs.
OP Mode
This indicates the radio’s operating mode, such as
AP
(access point).
Profile
This indicates the profile name to which the radio belongs.
Frequency Band
This indicates the wireless frequency currently being used by the radio.
This shows
-
when the radio is in monitor mode.
Channel ID
This indicates the radio’s channel ID.
Station
This displays the number of stations (aka wireless clients) associated with the radio.
Rx PKT
This displays the total number of packets received by the radio.
Tx PKT
This displays the total number of packets transmitted by the radio.
Rx FCS Error
Count
This indicates the number of received packet errors accrued by the radio.
Tx Retry Count
This indicates the number of times the radio has attempted to re-transmit packets.
