UAG4100 User’s Guide
292
C
H A P T E R
3 1
User/Group
31.1 Overview
This chapter describes how to set up user accounts, user groups, and user settings for the UAG. You
can also set up rules that control when users have to log in to the UAG before the UAG routes traffic
for them.
31.1.1 What You Can Do in this Chapter
• The
User
) provides a summary of all user accounts.
• The
Group
screen (see
) provides a summary of all user groups. In
addition, this screen allows you to add, edit, and remove user groups. User groups may consist of
access users and other user groups. You cannot put admin users in user groups
• The
Setting
) controls default settings, login settings,
lockout settings, and other user settings for the UAG. You can also use this screen to specify
when users must log in to the UAG before it routes traffic for them.
31.1.2 What You Need To Know
User Account
A user account defines the privileges of a user logged into the UAG. User accounts are used in
firewall rules, in addition to controlling access to configuration and services in the UAG.
User Types
These are the types of user accounts the UAG uses.
Table 136
Types of User Accounts
TYPE
ABILITIES
LOGIN METHOD(S)
Admin Users
admin
Change UAG configuration (web, CLI)
WWW, TELNET, SSH, FTP, Console
limited-admin
Look at UAG configuration (web, CLI)
Perform basic diagnostics (CLI)
WWW, TELNET, SSH, Console
Access Users
ext-user
External user account
WWW
ext-group-user
External group user account
WWW
guest-manager
Create dynamic guest accounts
WWW
pre-subscriber
Access network services
Web Authentication Portal
dynamic-guest
Access network services
Web Authentication Portal
