Chapter 40 System
UAG4100 User’s Guide
364
Figure 242
Configuration > System > USB Storage
The following table describes the labels in this screen.
40.4 Date and Time
For effective scheduling and logging, the UAG system time must be accurate. The UAG’s Real Time
Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time
manually or get the current time and date from an external server.
To change your UAG’s time based on your local time zone and date, click
Configuration > System
> Date/Time
. The screen displays as shown. You can manually set the UAG’s time and date or
have the UAG get the date and time from a time server.
Table 178
Configuration > System > USB Storage
LABEL
DESCRIPTION
Activate USB
storage service
Select this if you want to use the connected USB device(s).
Disk full warning
when remaining
space is less than
Set a number and select a unit (
MB
or
%
) to have the UAG send a warning message
when the remaining USB storage space is less than the value you set here.
Apply
Click
Apply
to save your changes back to the UAG.
Reset
Click
Reset
to return the screen to its last-saved settings.
