ZyXEL Communications UAG4100 User Manual Download

Page: 412 / 477

Chapter 41 Log and Report

UAG4100 User’s Guide

412

41.3.4 Edit Remote Server Log Settings

The

Log Settings Edit

screen controls the detailed settings for each log in the remote server

(syslog). Go to the

Log Settings Summary

screen (see

Section 41.3.1 on page 406

), and click a

remote server

Edit

icon.

Log Category

This field displays each category of messages. The

Default

category includes debugging

messages generated by open source software.

Selection

Select what information you want to log from each

Log Category

(except

All Logs

; see

below). Choices are:

disable all logs

(red X) - do not log any information from this category

enable normal logs

(green check mark) - log regular information and alerts from this

Summary of Contents for UAG4100






























































































































































































































































































































































































































































































Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands

ZyXEL Communications UAG4100, User Manual

Search results

Summary of Contents for UAG4100

Reviews:

Related manuals for UAG4100

Brands by name

Popular brands