Chapter 9 Wireless
UAG5100 User’s Guide
116
9.3.1 Edit AP List
Select an AP and click the Edit button in the Configuration > Wireless > AP Management table
to display this screen.
Figure 79
Configuration > Wireless > AP Management > Edit AP List
Each field is described in the following table.
Model
This field displays the AP’s hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the UAG and the information is
unavailable as a result.
R1 Mode / Profile
This field displays the operating mode (AP) and AP profile name for Radio 1. It displays
n/a for the profile for a radio not using an AP profile.
R2 Mode / Profile
This field displays the operating mode (AP) and AP profile name for Radio 2. It displays
n/a for the profile for a radio not using an AP profile.
Mgnt. VLAN ID(AC)
This displays the Access Controller (the UAG) management VLAN ID setting for the AP.
Mgnt. VLAN ID(AP)
This displays the runtime management VLAN ID setting on the AP. VLAN Conflict
displays if the AP’s management VLAN ID does not match the Mgnt. VLAN ID(AC).
This field displays n/a if the UAG cannot get VLAN information from the AP.
Description
This field displays the AP’s description, which you can configure by selecting the AP’s
entry and clicking the Edit button.
Table 47
Configuration > Wireless > AP Management (continued)
LABEL
DESCRIPTION
Table 48
Configuration > Wireless > AP Management > Edit AP List
LABEL
DESCRIPTION
Create new Object
Use this menu to create a new Radio Profile object to associate with this AP.
MAC
This displays the MAC address of the selected AP.