Chapter 12 Policy and Static Routes
UAG5100 User’s Guide
173
12.3 IP Static Route Screen
Click Configuration > Network > Routing > Static Route to open the Static Route screen.
This screen displays the configured static routes. Configure static routes to be able to propagate the
routing information to other routers.
Figure 106
Configuration > Network > Routing > Static Route
DSCP Marking
Set how the UAG handles the DSCP value of the outgoing packets that match this route.
Select one of the pre-defined DSCP values to apply or select User Define to specify
another DSCP value. The “af” choices stand for Assured Forwarding. The number following
the “af” identifies one of four classes and one of three drop preferences. See
Forwarding (AF) PHB for DiffServ on page 175
for more details.
Select preserve to have the UAG keep the packets’ original DSCP value.
Select default to have the UAG set the DSCP value of the packets to 0.
User-Defined
DSCP Marking
Use this field to specify a custom DSCP value.
Address
Translation
Use this section to configure NAT for the policy route. This section does not apply to policy
routes that use a VPN tunnel as the next hop.
Source Network
Address
Translation
Select none to not use NAT for the route.
Select outgoing-interface to use the IP address of the outgoing interface as the source
IP address of the packets that matches this route.
To use SNAT for a virtual interface that is in the same WAN trunk as the physical interface
to which the virtual interface is bound, the virtual interface and physical interface must be
in different subnets.
Otherwise, select a pre-defined address (group) to use as the source IP address(es) of the
packets that match this route.
Use Create new Object if you need to configure a new address (group) to use as the
source IP address(es) of the packets that match this route.
OK
Click OK to save your changes back to the UAG.
Cancel
Click Cancel to exit this screen without saving.
Table 74
Configuration > Network > Routing > Policy Route > Add/Edit (continued)
LABEL
DESCRIPTION