Chapter 16 VPN 1-1 Mapping
UAG5100 User’s Guide
194
The following table describes the labels in this screen.
16.2.1 The VPN 1-1 Mapping Add/Edit Screen
Click Network > VPN 1-1 Mapping to open the VPN 1-1 Mapping > General screen. Then click
the Add icon or select an entry and click the Edit icon to open the VPN 1-1 Mapping Add/Edit
Policy screen where you can configure the rule.
Figure 121
Network > VPN 1-1 Mapping > Add
Table 85
Configuration > Network > VPN 1-1 Mapping
LABEL
DESCRIPTION
Enable VPN 1-1
Mapping
Select this option to enable VPN 1-1 mapping on the UAG.
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate
To turn on an entry, select it and click Activate.
Inactivate
To turn off an entry, select it and click Inactivate.
Move
To change a rule’s position in the numbered list, select the rule and click Move to display a
field to type a number for where you want to put that rule and press [ENTER] to move the
rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
#
This field is a sequential value, and it is not associated with a specific entry.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
User / Group
This field displays the name of the user or user group object to which this rule is applied.
Pool Profile
This field displays the name of the pool profile used by this rule.
Apply
Click this button to save your changes to the UAG.
Reset
Click this button to return the screen to its last-saved settings.