Chapter 21 IP/MAC Binding
UAG5100 User’s Guide
217
21.2.2 Static DHCP Add/Edit
In the Configuration > Network > IP/MAC Binding > Summary > Edit screen, click the Add
icon or select an entry and click the Edit icon to open the following screen. Use this screen to
configure an interface’s IP to MAC address binding settings.
Figure 143
Configuration > Network > IP/MAC Binding > Summary > Edit > Add
The following table describes the labels in this screen.
21.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the UAG
does not apply IP/MAC binding.
MAC Address
This is the MAC address of the device to which the UAG assigns the entry’s IP address.
Description
This helps identify the entry.
OK
Click OK to save your changes back to the UAG.
Cancel
Click Cancel to exit this screen without saving.
Table 95
Configuration > Network > IP/MAC Binding > Summary > Edit (continued)
LABEL
DESCRIPTION
Table 96
Configuration > Network > IP/MAC Binding > Summary > Edit > Add/Edit
LABEL
DESCRIPTION
Interface Name
This field displays the name of the interface within the UAG and the interface’s IP address
and subnet mask.
IP Address
Enter the IP address that the UAG is to assign to a device with the entry’s MAC address.
MAC Address
Enter the MAC address of the device to which the UAG assigns the entry’s IP address.
Description
Enter up to 64 printable ASCII characters to help identify the entry. For example, you
may want to list the computer’s owner.
OK
Click OK to save your changes back to the UAG.
Cancel
Click Cancel to exit this screen without saving.