Chapter 23 IPnP
UAG5100 User’s Guide
224
23.2 IPnP Screen
This screen allows you to enable IPnP on the UAG and specific internal interface(s). To access this
screen click Configuration > Network > IPnP.
Figure 150
Configuration > Network > IPnP
The following table describes the labels in this screen.
Table 101
Configuration > Network > IPnP
LABEL
DESCRIPTION
Enable IPnP
Select this option to turn on the IPnP feature on the UAG.
Note: You can enable this feature only when the firewall is enabled.
Member List
The Available list displays the name(s) of the internal interface(s) on which you can
enable IPnP.
To enable IPnP on an interface, you can double-click a single entry to move it or use the
[Shift] or [Ctrl] key to select multiple entries and click the right arrow button to add to the
Member list. To remove an interface, select the name(s) in the Member list and click the
left arrow button.
Apply
Click Apply to save your changes back to the UAG.
Reset
Click Reset to return the screen to its last-saved settings.
