Chapter 24 Web Authentication
UAG5100 User’s Guide
235
Figure 157
Configuration > Object > User/Group > Group > Add
3
Repeat this process to set up the remaining user groups.
24.2.2.3 Set Up User Authentication Using the RADIUS Server
This step sets up user authentication using the RADIUS server. First, configure the settings for the
RADIUS server. Then, set up the authentication method, and configure the UAG to use the
authentication method. Finally, force users to log into the UAG before it routes traffic for them.
1
Click Configuration > Object > AAA Server > RADIUS. Double-click the radius entry.
Configure the RADIUS server’s address, authentication port (1812 if you were not told otherwise),
and key. Click Apply.