Chapter 33 AP Profile
UAG5100 User’s Guide
352
33.3.5 MAC Filter List
This screen allows you to create and manage security configurations that can be used by your
SSIDs. To access this screen click Configuration > Object > AP Profile > SSID > MAC Filter
List.
Note: You can have a maximum of 32 MAC filtering profiles on the UAG.
Figure 231
Configuration > Object > AP Profile > SSID > MAC Filter List
The following table describes the labels in this screen.
Idle Timeout
Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Group Key Update
Timer
Enter the interval (in seconds) at which the AP updates the group WPA encryption key.
Pre-Authentication
This field is available only when you set Security Mode to wpa2 or wpa2-mix and
enable 802.1x authentication.
Enable or Disable pre-authentication to allow the AP to send authentication
information to other APs on the network, allowing connected wireless clients to switch
APs without having to re-authenticate their network connection.
OK
Click OK to
save your changes back to the UAG.
Cancel
Click Cancel to exit this screen without saving your changes.
Table 157
Configuration > Object > AP Profile > SSID > Security List > Add/Edit (continued)
LABEL
DESCRIPTION
Table 158
Configuration > Object > AP Profile > SSID > MAC Filter List
LABEL
DESCRIPTION
Add
Click this to add a new MAC filtering profile.
Edit
Click this to edit the selected MAC filtering profile.
Remove
Click this to remove the selected MAC filtering profile.
Object Reference Click this to view which other objects are linked to the selected MAC filtering profile (for
example, SSID profile).
#
This field is a sequential value, and it is not associated with a specific profile.
Profile Name
This field indicates the name assigned to the MAC filtering profile.
Filter Action
This field indicates this profile’s filter action (if any).