Chapter 34 Addresses
UAG5100 User’s Guide
355
Figure 233
Configuration > Object > Address > Address
The following table describes the labels in this screen. See
for more
information as well.
34.2.1 Address Add/Edit Screen
The Configuration > Object > Address Add/Edit screen allows you to create a new address or
edit an existing one. To access this screen, go to the Address screen (see
), and either click the Add icon or select an entry and click the Edit icon in the Configuration
section.
Figure 234
IPv4 Address Configuration > Add/Edit
Table 160
Configuration > Object > Address > Address
LABEL
DESCRIPTION
Configuration
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See
for an example.
#
This field is a sequential value, and it is not associated with a specific address.
Name
This field displays the configured name of each address object.
Type
This field displays the type of each address object. “INTERFACE” means the object uses
the settings of one of the UAG’s interfaces.
IPv4 Address
This field displays the IPv4 addresses represented by each address object. If the object’s
settings are based on one of the UAG’s interfaces, the name of the interface displays first
followed by the object’s current address settings.
