Chapter 37 AAA Server
UAG5100 User’s Guide
370
Figure 246
Configuration > Object > AAA Server > RADIUS > Add/Edit
The following table describes the labels in this screen.
Table 172
Configuration > Object > AAA Server > RADIUS > Add/Edit
LABEL
DESCRIPTION
Name
Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Description
Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Server Address
Enter the address of the RADIUS server.
Authentication
Port
Specify the port number on the RADIUS server to which the UAG sends authentication
requests. Enter a number between 1 and 65535.
Backup Server
Address
If the RADIUS server has a backup server, enter its address here.
Backup
Authentication
Port
Specify the port number on the RADIUS server to which the UAG sends authentication
requests. Enter a number between 1 and 65535.
Timeout
Specify the timeout period (between 1 and 300 seconds) before the UAG disconnects from
the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or the
RADIUS server is down.
NAS IP Address
If the RADIUS server requires the UAG to provide the Network Access Server (NAS) IP
address attribute with a specific value, enter it here.
Case-sensitive
User Names
Select this if the server checks the case of the usernames.