manualshive.com logo in svg

ZyXEL Communications UAG5100, User Manual

The ZyXEL Communications UAG5100 is a versatile networking device designed for seamless internet connectivity in various environments. Stay up to date with the latest features and enhancements by easily accessing the Firmware Release Notes, user manual, and valuable resources for free download at 88.208.23.73:8080.

Share
Download
background image

Chapter 41 System

UAG5100 User’s Guide

402

The following table describes the labels in this screen.  

Table 189   

Configuration > System > DNS

LABEL

DESCRIPTION

Address/PTR 
Record

This record specifies the mapping of a Fully-Qualified Domain Name (FQDN) to an IP 
address. An FQDN consists of a host and domain name. For example, www.zyxel.com.tw 
is a fully qualified domain name, where “www” is the host, “zyxel” is the third-level 
domain, “com” is the second-level domain, and “tw” is the top level domain.

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click Edit to be able to modify the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The UAG confirms you want to remove it 
before doing so. Note that subsequent entries move up by one when you take this action.

#

This is the index number of the address/PTR record.

FQDN

This is a host’s fully qualified domain name.

IP Address

This is the IP address of a host.

Domain Zone 
Forwarder

This specifies a DNS server’s IP address. The UAG can query the DNS server to resolve 
domain zones for features like VPN, DDNS and the time server.

When the UAG needs to resolve a domain zone, it checks it against the domain zone 
forwarder entries in the order that they appear in this list. 

Add

Click this to create a new entry. Select an entry and click Add to create a new entry after 
the selected entry.

Edit

Double-click an entry or select it and click Edit to be able to modify the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The UAG confirms you want to remove it 
before doing so. Note that subsequent entries move up by one when you take this action.

Move

To change an entry’s position in the numbered list, select the method and click Move to 
display a field to type a number for where you want to put it and press [ENTER] to move 
the rule to the number that you typed.

#

This is the index number of the domain zone forwarder record. The ordering of your rules 
is important as rules are applied in sequence. 

A hyphen (-) displays for the default domain zone forwarder record. The default record is 
not configurable. The UAG uses this default record if the domain zone that needs to be 
resolved does not match any of the other domain zone forwarder records.

Domain Zone

A domain zone is a fully qualified domain name without the host. For example, 
zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully qualified domain name.

A “*” means all domain zones. 

Type

This displays whether the DNS server IP address is assigned by the ISP dynamically 
through a specified interface or configured manually (User-Defined).

DNS Server

This is the IP address of a DNS server. This field displays N/A if you have the UAG get a 
DNS server IP address from the ISP dynamically but the specified interface is not active.

Query Via

This is the interface through which the UAG sends DNS queries to the entry’s DNS server. 
If the UAG connects through a VPN tunnel, tunnel displays. 

MX Record (for My 
FQDN)

A MX (Mail eXchange) record identifies a mail server that handles the mail for a particular 
domain.

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click Edit to be able to modify the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The UAG confirms you want to remove it 
before doing so. Note that subsequent entries move up by one when you take this action.

#

This is the index number of the MX record.

Domain Name

This is the domain name where the mail is destined for.

Summary of Contents for UAG5100


























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for UAG5100

National Instruments WSN-9791 Getting Started Manual preview
WSN-9791
Brand: National Instruments Pages: 15
MSA FieldServer FS-B35 Series Startup Manual preview
FieldServer FS-B35 Series
Brand: MSA Pages: 25
NetComm Wireless NF17ACV Quick Start Manual preview
NF17ACV
Brand: NetComm Wireless Pages: 28
DEUTSCHMANN AUTOMATION UNIGATE MB EtherCAT Instruction Manual preview
UNIGATE MB EtherCAT
Brand: DEUTSCHMANN AUTOMATION Pages: 60
Pathway connectivity solutions Pathport OCT User Manual preview
Pathport OCT
Brand: Pathway connectivity solutions Pages: 14
Pace 5111NV Installation Manual preview
5111NV
Brand: Pace Pages: 19
Synapse SNAPconnect E12 User Manual preview
SNAPconnect E12
Brand: Synapse Pages: 35
H3C SR6602-I AI Series Installation, Quick Start preview
SR6602-I AI Series
Brand: H3C Pages: 29
ioSelect WMR-900 Operating Manual preview
WMR-900
Brand: ioSelect Pages: 160
ADTRAN NetVanta 6330 Series Quick Start preview
NetVanta 6330 Series
Brand: ADTRAN Pages: 4
D-Link DI-707 Quick Installation Manual preview
DI-707
Brand: D-Link Pages: 7
D-Link DPG-2000W - AirPlus G Wireless Presentation Gateway Quick Installation Manual preview
DPG-2000W - AirPlus G Wireless Presentation Gateway
Brand: D-Link Pages: 12
D-Link DVG-2004S Quick User Manual preview
DVG-2004S
Brand: D-Link Pages: 37
D-Link DSA 5100 - Airspot - Gateway Installation Manual preview
DSA 5100 - Airspot - Gateway
Brand: D-Link Pages: 28
D-Link DIV-140 Quick Installation Manual preview
DIV-140
Brand: D-Link Pages: 12
D-Link DI-701 iShare Technical Manual preview
DI-701 iShare
Brand: D-Link Pages: 50
D-Link DSL-604+ User Manual preview
DSL-604+
Brand: D-Link Pages: 67
D-Link DHM-301T User Manual preview
DHM-301T
Brand: D-Link Pages: 17

Brands by name

Popular brands

Load more brands