Chapter 42 Log and Report
UAG5100 User’s Guide
437
The following table describes the labels in this screen.
42.3 Log Settings Screens
The Log Settings screens control log messages and alerts. A log message stores the information
for viewing or regular e-mailing later, and an alert is e-mailed immediately. Usually, alerts are used
for events that require more serious attention, such as system errors and attacks.
The UAG provides a system log and supports e-mail profiles and remote syslog servers. View the
system log in the MONITOR > Log screen. Use the e-mail profiles to mail log messages to the
specific destinations. You can also have the UAG store system logs on a connected USB storage
device. The other four logs are stored on specified syslog servers.
The Log Settings screens control what information the UAG saves in each log. You can also specify
which log messages to e-mail for the system log, and where and how often to e-mail them. These
screens also set for which events to generate alerts and where to email the alerts.
The first Log Settings screen provides a settings summary. Use the Edit screens to configure
settings such as log categories, e-mail addresses, and server names for any log. Use the Log
Table 203
Configuration > Log & Report > Email Daily Report
LABEL
DESCRIPTION
Enable Email
Daily Report
Select this to send reports by e-mail every day.
Mail Server
Type the name or IP address of the outgoing SMTP server.
Mail Subject
Type the subject line for the outgoing e-mail. Select Append system name to add the
UAG’s system name to the subject. Select Append date time to add the UAG’s system
date and time to the subject.
Mail From
Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Mail To
Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the SMTP
server.
User Name
This box is effective when you select the SMTP Authentication check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
Password
This box is effective when you select the SMTP Authentication check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Retype to
Confirm
Retype your new password for confirmation.
Send Report Now
Click this button to have the UAG send the daily e-mail report immediately.
Time For Sending
Report
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour
notation.
Report Items
Select the information to include in the report. Select Reset counters after sending
report successfully if you only want to see statistics for a 24 hour period.
Reset All
Counters
Click this to discard all report data and start all of the counters over at zero.
Apply
Click Apply to save your changes back to the UAG.
Reset
Click Reset to return the screen to its last-saved settings.
