Chapter 6 Dashboard
UAG5100 User’s Guide
75
The following table describes the labels in this screen.
6.2.6 The Number of Login Users Screen
Use this screen to look at a list of the users currently logged into the UAG. Users who close their
browsers without logging out are still shown as logged in here. To access this screen, click Number
of Login Users in System Status in the dashboard.
Figure 51
Dashboard > Number of Login Users
Table 17
Dashboard > DHCP Table
LABEL
DESCRIPTION
#
This field is a sequential value, and it is not associated with a specific entry.
Interface
This field identifies the interface that assigned an IP address to a DHCP client.
IP Address
This field displays the IP address currently assigned to a DHCP client or reserved for a specific
MAC address. Click the column’s heading cell to sort the table entries by IP address. Click the
heading cell again to reverse the sort order.
Host Name
This field displays the name used to identify this device on the network (the computer name).
The UAG learns these from the DHCP client requests. “None” shows here for a static DHCP
entry.
MAC Address This field displays the MAC address to which the IP address is currently assigned or for which
the IP address is reserved. Click the column’s heading cell to sort the table entries by MAC
address. Click the heading cell again to reverse the sort order.
Description
For a static DHCP entry, the host name or the description you configured shows here. This field
is blank for dynamic DHCP entries.
Reserve
If this field is selected, this entry is a static DHCP entry. The IP address is reserved for the MAC
address.
If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned to a DHCP
client.
To create a static DHCP entry using an existing dynamic DHCP entry, select this field.
To remove a static DHCP entry, clear this field.
Refresh
Interval
Enter how often you want this window to be automatically updated.
Refresh Now
Click this to update the information in the window right away.
