Chapter 7 Monitor
UAG5100 User’s Guide
96
The following table describes the labels in this screen.
7.13 The Radio List Screen
Use this screen to view statistics about the wireless radio transmitters in each of the APs connected
to the UAG. To access this screen, click Monitor > Wireless > AP Information > Radio List.
Figure 65
Monitor > Wireless > AP Information > Radio List
The following table describes the labels in this screen.
Table 34
Monitor > Wireless > AP Information > AP List > Station Count of AP
LABEL
DESCRIPTION
Configuration
Status
This displays whether or not any of the AP’s configuration is in conflict with the UAG’s
settings for the AP.
Non Support
If any of the AP’s configuration conflicts with the UAG’s settings for the AP, this field
displays which configuration conflicts. It displays n/a if none of the AP’s configuration
conflicts with the UAG’s settings for the AP.
Station Count
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
Last Update
This field displays the date and time the information in the window was last updated.
Table 35
Monitor > Wireless > AP Information > Radio List
LABEL
DESCRIPTION
More
Information
Click this to view additional information about the selected radio’s SSID(s), wireless traffic
and wireless clients. Information spans a 24 hour period.
#
This is the radio’s index number in this list.
AP Description
This displays the description of the AP to which the radio belongs.
Model
This displays the model of the AP to which the radio belongs.
MAC Address
This displays the MAC address of the radio.
Radio
This indicates the radio number on the AP to which it belongs.
OP Mode
This indicates the radio’s operating mode, such as AP (access point).
Profile
This indicates the profile name to which the radio belongs.
