Chapter 41 System
UAG5100 User’s Guide
412
The following table describes the labels in this screen.
41.7.6 Customizing the WWW Login Page
Click Configuration > System > WWW > Login Page to open the Login Page screen. Use this
screen to customize the Web Configurator login screen. You can also customize the page that
displays after an access user logs into the Web Configurator to access network services like the
Internet. See
for more on access user accounts.
Table 195
Configuration > System > Service Control Rule > Add/Edit
LABEL
DESCRIPTION
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Address Object
Select ALL to allow or deny any computer to communicate with the UAG using this service.
Select a predefined address object to just allow or deny the computer with the IP address
that you specified to access the UAG using this service.
Zone
Select ALL to allow or prevent any UAG zones from being accessed using this service.
Select a predefined UAG zone on which a incoming service is allowed or denied.
Action
Select Accept to allow the user to access the UAG from the specified computers.
Select Deny to block the user’s access to the UAG from the specified computers.
OK
Click OK to save your customized settings and exit this screen.
Cancel
Click Cancel to exit this screen without saving
