ZyWALL USG Series User’s Guide
1013
47.8 The Routing Traces Screen
Click
Maintenance > Diagnostics > Routing Traces
to display this screen. Use this screen to configure a
traceroute to identify where packets are dropped for troubleshooting.
Figure 722
Maintenance > Diagnostics > Routing Traces
The following fields display when you select
Test Email Server
in
Network Tool
.
Mail Server
Type the name or IP address of the outgoing SMTP server.
Mail Subject
Type the subject line for the outgoing e-mail.
• Select
Append system name
to add the Zyxel Device system name to the subject.
• Select
Append date time
to add the Zyxel Device date and time to the subject.
Mail Server Port
Enter the same port number here as is on the mail server for mail traffic.
TLS Security
Select this option if the mail server uses Transport Layer Security (TLS) for encrypted
communications between the mail server and the Zyxel Device.
STARTTLS
Select this option if the mail server uses SSL or TLS for encrypted communications
between the mail server and the Zyxel Device.
Authenticate Server
Select this if the Zyxel Device authenticates the mail server in the TLS handshake.
Mail From
Type the e-mail address from which the outgoing e-mail is delivered. This address is used
in replies.
Mail To
Type the e-mail address to which the outgoing e-mail is delivered.
SMTP Authentication Select this check box if it is necessary to provide a user name and password to the SMTP
server.
User Name
This box is effective when you select the
SMTP Authentication
check box. Type the user
name to provide to the SMTP server when the log is e-mailed.
Password
This box is effective when you select the
SMTP Authentication
check box. Type a
password of up to 63 characters to provide to the SMTP server when the log is e-mailed.
Retype to Confirm
Retype your new password for confirmation.
Test
Click this button to start the test.
Stop
Click this button to stop the test.
Reset
Click this button to return the screen to its last-saved settings.
Table 412 Maintenance > Diagnostics > Network Tool (continued)
LABEL
DESCRIPTION
Summary of Contents for USG110
