manualshive.com logo in svg

ZyXEL Communications USG110, User Manual

The ZyXEL Communications USG110 Initial Setup Manual is an essential resource for users looking to set up their USG110 firewall device. This comprehensive manual provides step-by-step instructions and guidance for a hassle-free installation process. Download this user manual for free from our website and get started with your USG110 today.

Share
Download
background image

 Chapter 7 Monitor

ZyWALL USG Series User’s Guide

201

Each field is described in the following table. 

Table 38   Monitor > System Status > Interface Status

LABEL

DESCRIPTION

Interface Status

If an Ethernet interface does not have any physical ports associated with it, its entry is displayed in light gray text.

Name

This field displays the name of each interface. If there is an 

Expand 

icon (plus-sign) next to the 

name, click this to look at the status of virtual interfaces on top of this interface.

Port/Binding

This field displays the physical port number.

Status

This field displays the current status of each interface. The possible values depend on what 
type of interface it is.

For Ethernet interfaces:

•

Inactive

 - The Ethernet interface is disabled.

•

Down

 - The Ethernet interface does not have any physical ports associated with it or the 

Ethernet interface is enabled but not connected.

•

Speed / Duplex

 - The Ethernet interface is enabled and connected. This field displays the 

port speed and duplex setting (

Full

 or 

Half

).

For cellular (mobile broadband) interfaces, see 

Section 7.13 on page 218

 the Web Help for the 

status that can appear. 

For the auxiliary interface:

•

Inactive

 - The auxiliary interface is disabled.

•

Connected

 - The auxiliary interface is enabled and connected. 

•

Disconnected

 - The auxiliary interface is not connected. 

For virtual interfaces, this field always displays 

Up

. If the virtual interface is disabled, it does not 

appear in the list.

For VLAN and bridge interfaces, this field always displays 

Up

. If the VLAN or bridge interface is 

disabled, it does not appear in the list.

For PPP interfaces:

•

Connected

 - The PPP interface is connected.

•

Disconnected

 - The PPP interface is not connected.

If the PPP interface is disabled, it does not appear in the list.

For WLAN interfaces:

•

Up

 - The WLAN interface is enabled. 

•

Down

 - The WLAN interface is disabled.

HA Status

This field displays the status of the interface in the virtual router.

•

Active

 - This interface is the master interface in the virtual router.

•

Stand-By

 - This interface is a backup interface in the virtual router.

•

Fault

 - This VRRP group is not functioning in the virtual router right now. For example, this 

might happen if the interface is down. 

•

n/a

 - Device HA is not active on the interface.

Zone

This field displays the zone to which the interface is assigned.

IP Addr/Netmask

This field displays the current IP address and subnet mask assigned to the interface. If the IP 
address and subnet mask are 0.0.0.0, the interface is disabled or did not receive an IP address 
and subnet mask via DHCP.

If this interface is a member of an active virtual router, this field displays the IP address it is 
currently using. This is either the static IP address of the interface (if it is the master) or the 
management IP address (if it is a backup).

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for USG110

GajShield UTM Series Quick Start Manual preview
UTM Series
Brand: GajShield Pages: 8
Excelsecu Data Technology Co., Ltd. eSecu FIDO2 User Manual preview
eSecu FIDO2
Brand: Excelsecu Data Technology Co., Ltd. Pages: 17

Brands by name

Popular brands

Load more brands