Chapter 7 Monitor
ZyWALL USG Series User’s Guide
234
7.20 ZyMesh
Use this screen to view the ZyMesh traffic statistics between the managed APs. Click
Monitor > Wireless
> ZyMesh
to display this screen.
Figure 190
Monitor > Wireless > ZyMesh
The following table describes the labels in this screen.
7.21 SSID Info
Use this screen to view the number of wireless clients currently connected to an SSID and the security
type used by the SSID. Click
Monitor > Wireless > SSID Info
to display this screen.
Table 62 Monitor > Wireless > ZyMesh
LABEL
DESCRIPTION
#
This field displays the index number of the managed AP (in repeater mode) in this list.
Description
This field displays the descriptive name of the managed AP (in repeater mode).
IP Address
This field displays the IP address of the managed AP (in repeater mode).
Channel ID
This field displays the number of the channel used by the managed AP (in repeater
mode).
Hop
This is the hop count of the managed AP. For example, “1” means the managed AP
is connected to a root AP directly. “2” means there is another repeater AP between
the managed AP and the root AP.
Uplink AP Info
This shows the role and descriptive name of the managed AP to which this
managed AP is connected wirelessly.
SSID Name
This indicates the name of the wireless network (SSID) the managed AP uses to
associated with another managed AP.
Signal Strength
Before the slash, this shows the signal strength the uplink AP (a root AP or a repeater)
receives from this managed AP (in repeater mode).
After the slash, this shows the signal strength this managed AP (in repeater mode)
receives from the uplink AP.
Link Up Time
This field displays the time the managed AP first associated with the root AP or
repeater.
MAC Address
This field displays the MAC address of the managed AP (in repeater mode).
Tx Power
This field displays the output power of the managed AP (in repeater mode).
Root AP
This field displays the descriptive name of the root AP to which the managed AP is
connected wirelessly.
Tx Rate
This field displays the maximum transmission rate of the root AP or repeater to which
the managed AP is connected.
Rx Rate
This field displays the maximum reception rate of the root AP or repeater to which
the managed AP is connected.
Summary of Contents for USG110
