Chapter 10 Interfaces
ZyWALL USG Series User’s Guide
363
Enable Router
Advertisement
Select this to enable this interface to send router advertisement messages periodically. See
IPv6 Router Advertisement on page 300
for more information.
Advertised Hosts
Get Network
Configuration
From DHCPv6
Select this to have the Zyxel Device indicate to hosts to obtain network settings (such as
prefix and DNS settings) through DHCPv6.
Clear this to have the Zyxel Device indicate to hosts that DHCPv6 is not available and they
should use the prefix in the router advertisement message.
Advertised Hosts
Get Other
Configuration
From DHCPv6
Select this to have the Zyxel Device indicate to hosts to obtain DNS information through
DHCPv6.
Clear this to have the Zyxel Device indicate to hosts that DNS information is not available in
this network.
Router
Preference
Select the router preference (
Low
,
Medium
or
High
) for the interface. The interface sends
this preference in the router advertisements to tell hosts what preference they should use
for the Zyxel Device. This helps hosts to choose their default router especially when there
are multiple IPv6 router in the network.
Note: Make sure the hosts also support router preference to make this function
work.
MTU
The Maximum Transmission Unit. Type the maximum size of each IPv6 data packet, in bytes,
that can move through this interface. If a larger packet arrives, the Zyxel Device divides it
into smaller fragments.
Hop Limit
Enter the maximum number of network segments that a packet can cross before reaching
the destination. When forwarding an IPv6 packet, IPv6 routers are required to decrease the
Hop Limit by 1 and to discard the IPv6 packet when the Hop Limit is 0.
Advertised Prefix
Table
Configure this table only if you want the Zyxel Device to advertise a fixed prefix to the
network.
Add
Click this to create an IPv6 prefix address.
Edit
Select an entry in this table and click this to modify it.
Remove
Select an entry in this table and click this to delete it.
#
This field is a sequential value, and it is not associated with any entry.
IPv6
Address/
Prefix Length
Enter the IPv6 network prefix address and the prefix length.
The prefix length indicates what the left-most part of the IP address is the same for all
computers in the network, that is, the network address.
Advertised Prefix
from DHCPv6
Prefix Delegation
Use this table to configure the network prefix if you want to use a delegated prefix as the
beginning part of the network prefix.
Add
Click this to create an entry in this table.
Edit
Select an entry in this table and click this to modify it.
Remove
Select an entry in this table and click this to delete it.
References
Select an entry and click
References
to open a screen that shows which settings use the
entry.
#
This field is a sequential value, and it is not associated with any entry.
Delegated
Prefix
Select the DHCPv6 request object to use for generating the network prefix for the network.
Table 120 Configuration > Network > Interface > VLAN > Add / Edit (continued)
LABEL
DESCRIPTION
Summary of Contents for USG110
