manualshive.com logo in svg

ZyXEL Communications USG110, User Manual

The ZyXEL Communications USG110 Initial Setup Manual is an essential resource for users looking to set up their USG110 firewall device. This comprehensive manual provides step-by-step instructions and guidance for a hassle-free installation process. Download this user manual for free from our website and get started with your USG110 today.

Share
Download
background image

 Chapter 10 Interfaces

ZyWALL USG Series User’s Guide

377

DUID

This field displays the DHCP Unique IDentifier (DUID) of the interface, which is unique and 
used for identification purposes when the interface is exchanging DHCPv6 messages with 
others. See 

DHCPv6 on page 301

 for more information.

DUID as MAC

Select this if you want the DUID is generated from the interface’s default MAC address.

Customized DUID If you want to use a customized DUID, enter it here for the interface.

Enable Rapid 

Commit

Select this to shorten the DHCPv6 message exchange process from four to two steps. This 
function helps reduce heavy network traffic load.

Note: Make sure you also enable this option in the DHCPv6 clients to make rapid 

commit work.

Information 

Refresh Time

Enter the number of seconds a DHCPv6 client should wait before refreshing information 
retrieved from DHCPv6.

Request Address

This field is available if you set this interface to DHCPv6 

Client

. Select this to get an IPv6 IP 

address for this interface from the DHCP server. Clear this to not get any IP address 
information through DHCPv6.

DHCPv6 Request 

Options / 

DHCPv6 Lease 

Options

If this interface is a DHCPv6 client, use this section to configure DHCPv6 request settings that 
determine what additional information to get from the DHCPv6 server.

If the interface is a DHCPv6 server, use this section to configure DHCPv6 lease settings that 
determine what to offer to the DHCPv6 clients.

 Add

Click this to create an entry in this table. See 

Section 10.5.5 on page 329

 for more 

information.

 Remove

Select an entry and click this to change the settings.

 Object

 Reference

Select an entry and click this to delete it from this table.

 #

This field is a sequential value, and it is not associated with any entry.

 Name

This field displays the name of the DHCPv6 request or lease object.

 Type

This field displays the type of the object.

 Value

This field displays the IPv6 prefix that the Zyxel Device obtained from an uplink router (

Server

 

is selected) or will advertise to its clients (

Client

 is selected).

Interface

When 

Relay

 is selected, select this check box and an interface from the drop-down list if 

you want to use it as the relay server.

Relay Server

When 

Relay

 is selected, select this check box and enter the IP address of a DHCPv6 server 

as the relay server.

IPv6 Router 
Advertisement 
Setting

Enable Router 

Advertisement

Select this to enable this interface to send router advertisement messages periodically. See 

IPv6 Router Advertisement on page 300

 for more information.

Advertised Hosts 

Get Network 

Configuration 

From DHCPv6

Select this to have the Zyxel Device indicate to hosts to obtain network settings (such as 
prefix and DNS settings) through DHCPv6. 

Clear this to have the Zyxel Device indicate to hosts that DHCPv6 is not available and they 
should use the prefix in the router advertisement message.

Advertised Hosts 

Get Other 

Configuration 

From DHCPv6

Select this to have the Zyxel Device indicate to hosts to obtain DNS information through 
DHCPv6.

Clear this to have the Zyxel Device indicate to hosts that DNS information is not available in 
this network.

Table 125   Configuration > Network > Interface > Bridge > Add / Edit (continued)

LABEL

DESCRIPTION

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for USG110

PaloAlto Networks PA-800 SERIES Hardware Reference Manual preview
PA-800 SERIES
Brand: PaloAlto Networks Pages: 36
ADTRAN Advanta 2100 Specifications preview
Advanta 2100
Brand: ADTRAN Pages: 2
Fortinet FortiGate 310B-LENC Quick Start Manual preview
FortiGate 310B-LENC
Brand: Fortinet Pages: 2
Watchguard Firebox 1500 Release Note preview
Firebox 1500
Brand: Watchguard Pages: 24
NETGEAR ProSafe FR114W Specifications preview
ProSafe FR114W
Brand: NETGEAR Pages: 2
Neoware Firewall User Manual preview
Firewall
Brand: Neoware Pages: 28
AXIOMTEK NA860 series User Manual preview
NA860 series
Brand: AXIOMTEK Pages: 88
Edge-Core SAF51003I Quick Start Manual preview
SAF51003I
Brand: Edge-Core Pages: 4

Brands by name

Popular brands

Load more brands