Chapter 2 Initial Setup Wizard
ZyWALL USG Series User’s Guide
59
2.1.5 Internet Access: L2TP
2.1.5.1 ISP Parameters
•
Authentication Type
- Select an authentication protocol for outgoing connection requests. Options
are:
•
Chap/PAP
- Your Zyxel Device accepts either CHAP or PAP when requested by the remote node.
•
Chap
- Your Zyxel Device accepts CHAP only.
•
PAP
- Your Zyxel Device accepts PAP only.
•
MSCHAP
- Your Zyxel Device accepts MSCHAP only.
•
MSCHAP-V2
- Your Zyxel Device accepts MSCHAP-V2 only.
• Type the
User Name
given to you by your ISP. You can use alphanumeric and -_@$./ characters, and
it can be up to 31 characters long.
• Type the
Password
associated with the user name. Use up to 64 ASCII characters except the [] and ?.
This field can be blank.
• Select
Nailed-Up
if you do not want the connection to time out. Otherwise, type the
Idle Timeout
in
seconds that elapses before the router automatically disconnects from the PPPoE server.
2.1.5.2 L2TP Configuration
•
Base Interface
: This identifies the Ethernet interface you configure to connect with a modem or router.
• Type a
Base IP Address
(static) assigned to you by your ISP.
•
IP Subnet Mask
: Enter the subnet mask for this WAN connection's IP address.
•
Gateway IP Address
: Enter the IP address of the router through which this WAN connection will send
traffic (the default gateway).
•
Server IP
: Type the IP address of the L2TP server.
2.1.5.3 WAN IP Address Assignments
•
WAN Interface
: This is the name of the interface that will connect with your ISP.
•
Zone:
This is the security zone to which this interface and Internet connection will belong.
•
IP Address
: Enter your (static) public IP address.
Auto
displays if you selected
Auto
as the
IP Address
Assignment
in the previous screen.
•
First / Second DNS Server
: These fields display if you selected static IP address assignment. The Domain
Name System (DNS) maps a domain name to an IP address and vice versa. Enter a DNS server's IP
address(es). The DNS server is extremely important because without it, you must know the IP address
of a computer before you can access it. The Zyxel Device uses these (in the order you specify here) to
resolve domain names for VPN, DDNS and the time server. Leave the field as 0.0.0.0 if you do not want
to configure DNS servers.
2.1.5.4 Possible Errors
• Check that you’re using the correct L2PT
Server IP
,
Subnet Mask
,
Gateway IP Address, IP Subnet Mask
and
Authentication Type
.
• Make sure that your Internet access information uses L2TP as the WAN connection type. Re-enter your
L2TP user name and password exactly as given. If it fails again, check with your Internet service
provider or administrator for correct WAN settings and user credentials.
• If you were given an IP address and DNS server information as part of your Internet access
information, re-enter them exactly as given. If it fails again, check with your Internet service provider
or administrator for correct IP address, subnet mask and gateway address and other WAN settings.
Summary of Contents for USG110
