background image

Chapter 3 Hardware, Interfaces and Zones

ZyWALL USG Series User’s Guide

72

3.1.2  Rear Panels

The connection ports are located on the rear panel.

Figure 52   

ZyWALL 110 / USG110 / USG210 Rear Panel

Figure 53   

ZyWALL 310 / ZyWALL 1100 / USG310 / USG1100 / USG1900 Rear Panel

CONSOLE

You can use the console port to manage the Zyxel Device using CLI commands. You will be 
prompted to enter your user name and password. See the Command Reference Guide for 
more information about the CLI. 

When configuring using the console port, you need a computer equipped with 
communications software configured to the following parameters:

• Speed 115200 bps
• Data Bits 8
• Parity  None
• Stop  Bit  1
• Flow Control Off

USB

Connect a storage device for system logs (see 

Maintenance > Diagnostics > System Log)

 and 

storage (see 

Configuration > System > USB Storage

).

P1 ~ P4

These are SFP (1G) ports. These are compatible 1G transceiver modules (at the time of writing):

• SFP-1000T
• SFP-SX-D
• SFP-LX-10-D
• SFP-BX1310-10-D
• SFP-BX1490-10-D
• SFP-LHX1310-40-D
• SFP-ZX-80-D

P5 ~ P16

These are 1G RJ-45 Ethernet ports.

P17 ~ P18

These are 10G combo (SFP+  & RJ-45) ports. These are compatible 10G transceiver modules (at 
the time of writing:)

• SFP10G-SR
• SFP10G-LR

Table 13   USG2200-VPN/USG2200 Front Panel Ports (continued)

LABEL

DESCRIPTION

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: