Chapter 43 Object
ZyWALL USG Series User’s Guide
845
The following table describes the labels in this screen.
43.7.3 Address Group Summary Screen
The
Address Group
screen provides a summary of all address groups. To access this screen, click
Configuration > Object
>
Address/Geo IP > Address Group
. Click a column’s heading cell to sort the
table entries by that column’s criteria. Click the heading cell again to reverse the sort order.
Figure 585
Configuration > Object > Address/Geo IP > Address Group
Table 325 Configuration > Object > Address/GeoIP > Address > Add/Edit (IPv6)
LABEL
DESCRIPTION
Name
Type the name used to refer to the address. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
Object Type
Select the type of address you want to create.
Note: The Zyxel Device automatically updates address objects that are based on an
interface’s IP address, subnet, or gateway if the interface’s IP address settings
change. For example, if you change 1’s IP address, the Zyxel Device
automatically updates the corresponding interface-based, LAN subnet
address object.
IPv6 Address
This field is only available if the
Address Type
is
HOST
. This field cannot be blank. Enter the IP
address that this address object represents.
IPv6 Starting
Address
This field is only available if the
Address Type
is
RANGE
. This field cannot be blank. Enter the
beginning of the range of IP addresses that this address object represents.
IPv6 Ending
Address
This field is only available if the
Address Type
is
RANGE
. This field cannot be blank. Enter the end
of the range of IP address that this address object represents.
IPv6 Address
Prefix
This field is only available if the
Address Type
is
SUBNET
. This field cannot be blank. Enter the IPv6
address prefix that the Zyxel Device uses for the LAN IPv6 address.
Interface
If you selected
INTERFACE IP
,
INTERFACE SUBNET
, or
INTERFACE GATEWAY
as the
Address Type
,
use this field to select the interface of the network that this address object represents.
IPv6 Address Type Select whether the IPv6 address is a link-local IP address (
LINK LOCAL
), static IP address
(
STATIC
), an IPv6 StateLess Address Auto Configuration IP address (
SLAAC
), or is obtained from
a DHCPv6 server (
DHCPv6
).
Region
If you selected
Geography
as the
Address Type
, use this field to select a country or continent.
FQDN
If you selected
FQDN
as the
Address Type
, use this field to enter a fully qualified domain name.
OK
Click
OK
to
save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to exit this screen without saving your changes.
Summary of Contents for USG110
