Chapter 43 Object
ZyWALL USG Series User’s Guide
871
2
Click
Add
.
3
Specify a descriptive name for identification purposes in the
Name
field. You may use 1-31
alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This
value is case-sensitive. For example, “My_Device”.
4
Click
Add
to insert an authentication method in the table.
5
Select a server object from the
Method List
drop-down list box.
6
You can add up to four server objects to the table. The ordering of the
Method List
column is important.
The Zyxel Device authenticates the users using the databases (in the local user database or the external
authentication server) in the order they appear in this screen.
If two accounts with the same username exist on two authentication servers you specify, the Zyxel
Device does not continue the search on the second authentication server when you enter the
username and password that doesn’t match the one on the first authentication server.
Note: You can NOT select two server objects of the same type.
7
Click
OK
to save the settings or click
Cancel
to discard all changes and return to the previous screen.
Figure 607
Configuration > Object > Auth. Method > Add
The following table describes the labels in this screen.
Table 344 Configuration > Object > Auth. Method > Add
LABEL
DESCRIPTION
Name
Specify a descriptive name for identification purposes.
You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. For example, “My_Device”.
Add
Click this to create a new entry. Select an entry and click
Add
to create a new entry after the
selected entry.
Edit
Double-click an entry or select it and click
Edit
to open a screen where you can modify the
entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The Zyxel Device confirms you want to remove
it before doing so.
Move
To change a method’s position in the numbered list, select the method and click
Move
to
display a field to type a number for where you want to put it and press [ENTER] to move the rule
to the number that you typed.
The ordering of your methods is important as Zyxel Device authenticates the users using the
authentication methods in the order they appear in this screen.
Summary of Contents for USG110
