Chapter 7 Monitor
ZyWALL USG Series User’s Guide
206
The following table displays the maximum number of records shown in the report, the byte count limit,
and the hit count limit.
IP Address/
User
This field displays the IP address or user in this record.
Amount
This field displays how much traffic was sent or received from the indicated IP address or user. If
the
Direction
is
Ingress
, a red bar is displayed; if the
Direction
is
Egress
, a blue bar is displayed.
The unit of measure is bytes, Kbytes, Mbytes or Gbytes, depending on the amount of traffic for
the particular IP address or user. The count starts over at zero if the number of bytes passes the
byte count limit. See
These fields are available when the
Traffic Type
is
Service/Port
.
#
This field is the rank of each record. The protocols and service ports are sorted by the amount
of traffic.
Service/Port
This field displays the service and port in this record. The maximum number of services and
service ports in this report is indicated in
.
Protocol
This field indicates what protocol the service was using.
Direction
This field indicates whether the indicated protocol or service port is sending or receiving traffic.
•
Ingress
- traffic is coming into the Zyxel Devicethrough the interface
•
Egress
- traffic is going out from the Zyxel Device through the interface
Amount
This field displays how much traffic was sent or received from the indicated service / port. If the
Direction
is
Ingress
, a red bar is displayed; if the
Direction
is
Egress
, a blue bar is displayed. The
unit of measure is bytes, Kbytes, Mbytes, Gbytes, or Tbytes, depending on the amount of traffic
for the particular protocol or service port. The count starts over at zero if the number of bytes
passes the byte count limit. See
These fields are available when the
Traffic Type
is
Web Site Hits
.
#
This field is the rank of each record. The domain names are sorted by the number of hits.
Web Site
This field displays the domain names most often visited. The Zyxel Device counts each page
viewed on a Web site as another hit. The maximum number of domain names in this report is
indicated in
.
Hits
This field displays how many hits the Web site received. The Zyxel Device counts hits by
counting HTTP GET packets. Many Web sites have HTTP GET references to other Web sites, and
the Zyxel Device counts these as hits too. The count starts over at zero if the number of hits
passes the hit count limit. See
.
These fields are available when the
Traffic Type
is
Country
.
#
This field is the rank of each record. The country name is sorted by the amount of traffic.
Country
Name
This field displays the name of the country.
Country
This field displays the country code.
Amount
This field displays how much traffic was sent or received from the indicated country. If the
Direction
is
Ingress
, a red bar is displayed; if the
Direction
is
Egress
, a blue bar is displayed. The
unit of measure is bytes, Kbytes, Mbytes, Gbytes, or Tbytes, depending on the amount of traffic
for the particular protocol or service port. The count starts over at zero if the number of bytes
passes the byte count limit. See
•
Ingress
- traffic is coming into the Zyxel Device from the country.
•
Egress
- traffic is going from the Zyxel Device to the country.
Table 40 Maximum Values for Reports
LABEL
DESCRIPTION
Maximum Number of Records
20
Table 39 Monitor > System Status > Traffic Statistics (continued)
LABEL
DESCRIPTION
Summary of Contents for USG110
