ZyXEL Communications USG110 User Manual Download

Page: 231 / 1090

Chapter 7 Monitor

ZyWALL USG Series User’s Guide

231

The following table describes the labels in this screen.

7.18 AP Information: Top N APs

Use this screen to view the top five or top ten wireless traffic usage and associated wireless stations for

the preceding 24 hours. Click

Monitor > Wireless > AP Information > Top N APs

to display the

Top N APs

screen.

Table 59 Monitor > Wireless > AP Information > Radio List > More Information

LABEL

DESCRIPTION

MBSSID Detail

This list shows information about the SSID(s) that is associated with the radio over the preceding
24 hours.

This is the items sequential number in the list. It has no bearing on the actual data in this list.

SSID Name

This displays an SSID associated with this radio. There can be up to eight maximum.

BSSID

This displays the MAC address associated with the SSID.

Security

Mode

This displays the security mode in which the SSID is operating.

Forwarding

Mode

This field indicates the forwarding mode (

Local Bridge

Tunnel

) associated with the SSID

profile.

VLAN

This displays the VLAN ID associated with the SSID.

Traffic Statistics

This graph displays the overall traffic information about the radio over the preceding 24 hours.

y-axis

This axis represents the amount of data moved across this radio in megabytes per second.

x-axis

This axis represents the amount of time over which the data moved across this radio.

Station Count

This graph displays information about all the wireless clients that have connected to the radio
over the preceding 24 hours.

y-axis

The y-axis represents the number of connected wireless clients.

x-axis

The x-axis shows the time over which a wireless client was connected.

Last Update

This field displays the date and time the information in the window was last updated.

Click this to close this window.

Cancel

Click this to close this window.

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands

ZyXEL Communications USG110, User Manual

Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands