ZyXEL Communications USG110 User Manual Download

Page: 661 / 1090

Chapter 32 SSL User Screens

ZyWALL USG Series User’s Guide

661

A popup window displays. Specify the new name and/or file extension in the field provided. You can
enter up to 356 characters. Then click

Apply

Note: Make sure the length of the name does not exceed the maximum allowed on the file

server.

You may not be able to open a file if you change the file extension.

Figure 470

File Sharing: Rename

32.7.7 Deleting a File or Folder

Click the

Delete

icon next to a file or folder to remove it.

32.7.8 Uploading a File

Follow the steps below to upload a file to the file server.

Log into the remote user screen and click the

File Sharing

tab.

Click

Upload

and specify the location and/or name of the file you want to upload. Or click

Browse

locate it.

Click

to send the file to the file server.

After the file is uploaded successfully, you should see the name of the file and a message in the screen.

Figure 471

File Sharing: File Upload

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands

ZyXEL Communications USG110, User Manual

Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands