ZyXEL Communications USG110 User Manual Download

Page: 741 / 1090

Chapter 39 Anti-Virus

ZyWALL USG Series User’s Guide

741

• Encrypted traffic. This could be password-protected files or VPN traffic where the Zyxel Device is not

the endpoint (pass-through VPN traffic).

• Traffic through custom (non-standard) ports. The Zyxel Device scans whatever port number is

specified for FTP in the ALG screen.

• All compressed files within a compressed file. Note that a single file can still be decompressed and

scanned if you select

Enable file decompression (ZIP and RAR)

• Traffic compressed or encoded using a method the Zyxel Device does not support.

Finding Out More

• See

Section 39.5 on page 749

for anti-virus background information.

39.1.1 What You Can Do in this Chapter

• Use the

Profile

screens (

Section 39.2 on page 741

) to turn anti-virus on or off, set up anti-virus policies

and custom service port rules. You can also check the anti-virus license and signature status.

• Use the

Black/White List

screen (

Section 39.3 on page 745

) to set up anti-virus black (blocked) and

white (allowed) lists of virus file patterns.

• Use the

Signature

screen (

Section 39.4 on page 748

) to search for particular signatures and get more

information about them.

39.2 Anti-Virus Profile Screen

Click

Configuration > UTM Profile

Anti-Virus

to display the configuration screen as shown next.

Click on the icons to go to the OneSecurity website where there is guidance on configuration
walkthroughs, troubleshooting and other information.

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands

ZyXEL Communications USG110, User Manual

Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands