Chapter 43 Object
ZyWALL USG Series User’s Guide
803
43.2.3 User/Group Group Summary Screen
User groups consist of access users and other user groups. You cannot put admin users in user groups.
The
Group
screen provides a summary of all user groups. In addition, this screen allows you to add, edit,
and remove user groups. To access this screen, login to the Web Configurator, and click
Configuration >
Object > User/Group > Group
.
Figure 553
Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See
for more
information as well.
Reauthentication
Time
If you select
Use Default Settings
in the
Authentication Timeout Settings
field, the default
lease time is shown.
If you select
Use Manual Settings
, you need to type the number of minutes this user can be
logged into the Zyxel Device in one session before the user has to log in again. You can
specify 1 to 1440 minutes. You can enter 0 to make the number of minutes unlimited. Unlike
Lease Time
, the user has no opportunity to renew the session without logging out.
User VLAN ID
This field is available for a ext-group-user type user account.
Select this option to enable dynamic VLAN assignment on the Zyxel Device. When a user is
authenticated successfully, all data traffic from this user is tagged with the VLAN ID number
you specify here.
This allows you to assign a user of the ext-group-user type to a specific VLAN based on the
user credentials instead of using an AAA server.
Configuration
Validation
Use a user account from the group specified above to test if the configuration is correct.
Enter the account’s user name in the
User Name
field and click
Test
.
OK
Click
OK
to
save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to exit this screen without saving your changes.
Table 295 Configuration > Object > User/Group > User > Add (continued)
LABEL
DESCRIPTION
Table 296 Configuration > Object > User/Group > Group
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click
Edit
to open a screen where you can modify the
entry’s settings.
Remove
To remove an entry, select it and click
Remove
. The Zyxel Device confirms you want to remove
it before doing so. Removing a group does not remove the user accounts in the group.
References
Select an entry and click
References
to open a screen that shows which settings use the entry.
#
This field is a sequential value, and it is not associated with a specific user group.
Group Name
This field displays the name of each user group.
Description
This field displays the description for each user group.
Summary of Contents for USG110
