ZyXEL Communications USG110 User Manual Download

Page: 853 / 1090

Chapter 43 Object

ZyWALL USG Series User’s Guide

853

43.8.3 The Service Group Summary Screen

The

Service Group

summary screen provides a summary of all service groups. In addition, this screen

allows you to add, edit, and remove service groups.

To access this screen, log in to the Web Configurator, and click

Configuration > Object

Service

Service Group

Figure 591

Configuration > Object > Service > Service Group

The following table describes the labels in this screen. See

Section 43.8.3.1 on page 854

for more

information as well.

Starting Port

Ending Port

This field appears if the

IP Protocol

TCP

UDP

. Specify the port number(s) used by this service.

If you fill in one of these fields, the service uses that port. If you fill in both fields, the service uses
the range of ports.

ICMP Type

This field appears if the

IP Protocol

ICMP

ICMPv6

Select the ICMP message used by this service. This field displays the message text, not the
message number.

IP Protocol
Number

This field appears if the

IP Protocol

User Defined

Enter the number of the next-level protocol (IP protocol). Allowed values are 1 - 255.

Click

save your changes back to the Zyxel Device.

Cancel

Click

Cancel

to exit this screen without saving your changes.

Table 331 Configuration > Object > Service > Service > Edit (continued)

LABEL

DESCRIPTION

Table 332 Configuration > Object > Service > Service Group

LABEL

DESCRIPTION

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click

Edit

to be able to modify the entry’s settings.

Remove

To remove an entry, select it and click

Remove

. The Zyxel Device confirms you want to remove

it before doing so.

References

Select an entry and click

References

to open a screen that shows which settings use the entry.

This field is a sequential value, and it is not associated with a specific service group.

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands

ZyXEL Communications USG110, User Manual

Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands