ZyXEL Communications USG110 User Manual Download | Manualshive

Page: 907 / 1090

background image

Chapter 44 System

ZyWALL USG Series User’s Guide

907

• Use the

System > IPv6

screen (see

Section 44.16 on page 958

) to enable or disable IPv6 support on the

Zyxel Device.

• Use the

System > ZON

screen (see

Section 44.17 on page 958

) to enable or disable the Zyxel One

Network (ZON) utility that uses Zyxel Discovery Protocol (ZDP) for discovering and configuring ZDP-

aware Zyxel devices in the same network as the computer on which ZON is installed.

Note: See each section for related background information and term definitions.

44.2 Host Name

A host name is the unique name by which a device is known on a network. Click

Configuration > System

> Host Name

to open the

Host Name

screen.

Figure 633

Configuration > System > Host Name

The following table describes the labels in this screen.

44.3 USB Storage

The Zyxel Device can use a connected USB device to store the system log and other diagnostic
information. Use this screen to turn on this feature and set a disk full warning limit.

Note: Only connect one USB device. It must allow writing (it cannot be read-only) and use the

FAT16, FAT32, EXT2, or EXT3 file system.

Click

Configuration > System > USB Storage

to open the screen as shown next.

Table 362 Configuration > System > Host Name

LABEL

DESCRIPTION

System Name

Enter a descriptive name to identify your Zyxel Device device. This name can be up to 64
alphanumeric characters long. Spaces are not allowed, but dashes (-) underscores (_) and
periods (.) are accepted.

Domain Name

Enter the domain name (if you know it) here. This name is propagated to DHCP clients
connected to interfaces with the DHCP server enabled. This name can be up to 254
alphanumeric characters long. Spaces are not allowed, but dashes “-” are accepted.

Apply

Click

Apply

to save your changes back to the Zyxel Device.

Reset

Click

Reset

to return the screen to its last-saved settings.

«
...
905
906
907
908
909
...
»

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for USG110

Check Point IP2450

Brand: Nokia Pages: 136

Brand: 3Com Pages: 154

Brand: Lanner Pages: 51

NetDefend DFL-2560G

Brand: D-Link Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands