manualshive.com logo in svg

ZyXEL Communications USG110, User Manual

The ZyXEL Communications USG110 Initial Setup Manual is an essential resource for users looking to set up their USG110 firewall device. This comprehensive manual provides step-by-step instructions and guidance for a hassle-free installation process. Download this user manual for free from our website and get started with your USG110 today.

Share
Download
background image

Chapter 44 System

ZyWALL USG Series User’s Guide

916

44.6.3  (IPv6) Address Record 

An address record contains the mapping of a Fully-Qualified Domain Name (FQDN) to an IP address. 

Edit

Double-click an entry or select it and click 

Edit 

to be able to modify the entry’s settings. 

Remove

To remove an entry, select it and click 

Remove

. The Zyxel Device confirms you want to 

remove it before doing so. Note that subsequent entries move up by one when you take this 
action.

#

This is the index number of the MX record.

Domain Name

This is the domain name where the mail is destined for.

IP/FQDN

This is the IP address or Fully-Qualified Domain Name (FQDN) of a mail server that handles the 
mail for the domain specified in the field above.

Security Option 
Control

Click 

Show Advanced Settings

 to display this part of the screen. There are two control 

policies: 

Default

 and 

Customize

.

Edit

Click either control policy and then click this button to change 

allow

 or 

deny

 actions for 

Query Recursion

 and 

Additional Info from Cache

.

Priority

The 

Customize

 control policy is checked first and if an address object match is not found, the 

Default

 control policy is checked.

Name

You may change the name of the 

Customize

 control policy.

Address

These are the object addresses used in the control policy. RFC1918 refers to private IP address 
ranges. It can be modified in 

Object > Address

.

Additional Info 

from Cache

This displays if the Zyxel Device is allowed or denied to cache Resource Records (RR) 
obtained from previous DNS queries. 

Query 

Recursion

This displays if the Zyxel Device is allowed or denied to forward DNS client requests to DNS 
servers for resolution.

Service Control

This specifies from which computers and zones you can send DNS queries to the Zyxel Device.

Add

Click this to create a new entry. Select an entry and click 

Add

 to create a new entry after the 

selected entry.

Edit

Double-click an entry or select it and click 

Edit 

to be able to modify the entry’s settings. 

Remove

To remove an entry, select it and click 

Remove

. The Zyxel Device confirms you want to 

remove it before doing so. Note that subsequent entries move up by one when you take this 
action.

Move

To change an entry’s position in the numbered list, select the method and click 

Move

 to 

display a field to type a number for where you want to put it and press [ENTER] to move the 
rule to the number that you typed.

#

This the index number of the service control rule. The ordering of your rules is important as 
rules are applied in sequence.

The entry with a hyphen (-) instead of a number is the Zyxel Device’s (non-configurable) 
default policy. The Zyxel Device applies this to traffic that does not match any other 
configured rule. It is not an editable rule. To apply other behavior, configure a rule that traffic 
will match so the Zyxel Device will not have to use the default policy.

Zone

This is the zone on the Zyxel Device the user is allowed or denied to access.

Address

This is the object name of the IP address(es) with which the computer is allowed or denied to 
send DNS queries.

Action

This displays whether the Zyxel Device accepts DNS queries from the computer with the IP 
address specified above through the specified zone (

Accept

) or discards them (

Deny

).

Table 367   Configuration > System > DNS (continued)

LABEL

DESCRIPTION

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for USG110

D-Link NetDefend DFL-260E Datasheet preview
NetDefend DFL-260E
Brand: D-Link Pages: 6
D-Link NetDefend DFL-260E Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 198
D-Link DFL-300 - Security Appliance Quick Install Manual preview
DFL-300 - Security Appliance
Brand: D-Link Pages: 12
D-Link NetDefend SOHO DFL-160 User Manual preview
NetDefend SOHO DFL-160
Brand: D-Link Pages: 130
D-Link DFL-1600 - Security Appliance Quick Manual preview
DFL-1600 - Security Appliance
Brand: D-Link Pages: 22
D-Link DFL-700 - Security Appliance Manual preview
DFL-700 - Security Appliance
Brand: D-Link Pages: 141
D-Link DFL-210 - NetDefend - Security Appliance Cli Reference Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 213
D-Link DFL-800 - Security Appliance Quick Manual preview
DFL-800 - Security Appliance
Brand: D-Link Pages: 20
D-Link DFL-210 - NetDefend - Security Appliance User Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 469
D-Link DFL-500 Quick Install Manual preview
DFL-500
Brand: D-Link Pages: 8
W&T 55211 Manual preview
55211
Brand: W&T Pages: 114
SonicWALL NSA E7500 Getting Started Manual preview
NSA E7500
Brand: SonicWALL Pages: 43
ZyXEL Communications USG1100 Quick Start Manual preview
USG1100
Brand: ZyXEL Communications Pages: 8
D-Link DFL-500 User Manual preview
DFL-500
Brand: D-Link Pages: 140
D-Link DFL-260 - NetDefend - Security Appliance Quick Manual preview
DFL-260 - NetDefend - Security Appliance
Brand: D-Link Pages: 20
NETGEAR FVG318v2 - ProSafe 802.11g Wireless VPN Firewall Switch Use Manual preview
FVG318v2 - ProSafe 802.11g Wireless VPN Firewall Switch
Brand: NETGEAR Pages: 9
NETGEAR FVS328 - ProSafe VPN Firewall Reference Manual preview
FVS328 - ProSafe VPN Firewall
Brand: NETGEAR Pages: 228

Brands by name

Popular brands

Load more brands