ZyXEL Communications USG110 User Manual Download

Page: 973 / 1090

Chapter 45 Log and Report

ZyWALL USG Series User’s Guide

973

Figure 694

Configuration > Log & Report > Log Setting > Edit (USB Storage)

The following table describes the labels in this screen.

Table 395 Configuration > Log & Report > Log Setting > Edit (USB Storage)

LABEL

DESCRIPTION

Duplicate logs to
USB storage (if
ready)

Select this to have the Zyxel Device save a copy of its system logs to a connected USB storage
device. Use the

Active Log

section to specify what kinds of messages to include.

Enable log keep
duration:

Select this checkbox to enter a value in the

Keep Duration

field.

Keep duration:

Enter a number of days that the Zyxel Device keeps this log.

Active Log

Selection

Use the

Selection

drop-down list to change the log settings for all of the log categories.

disable all logs

(red X) - do not send the remote server logs for any log category.

enable normal logs

(green check mark) - send the remote server log messages and alerts for

all log categories.

enable normal logs and debug logs

(yellow check mark) - send the remote server log

messages, alerts, and debugging information for all log categories.

This field is a sequential value, and it is not associated with a specific entry.

Log Category

This field displays each category of messages. The

Default

category includes debugging

messages generated by open source software.

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands

ZyXEL Communications USG110, User Manual

Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands