ZyXEL Communications USG110 User Manual Download

Page: 985 / 1090

Chapter 46 File Manager

ZyWALL USG Series User’s Guide

985

Configuration File Flow at Restart

• If there is not a

startup-config.conf

when you restart the Zyxel Device (whether through a

management interface or by physically turning the power off and back on), the Zyxel Device uses the

system-default.conf

configuration file with the Zyxel Device’s default settings.

• If there is a

startup-config.conf

, the Zyxel Device checks it for errors and applies it. If there are no

errors, the Zyxel Device uses it and copies it to the

lastgood.conf

configuration file as a back up file. If

there is an error, the Zyxel Device generates a log and copies the

startup-config.conf

configuration

file to the

startup-config-bad.conf

configuration file and tries the existing

lastgood.conf

configuration

file. If there isn’t a

lastgood.conf

configuration file or it also has an error, the Zyxel Device applies the

system-default.conf

configuration file.

• You can change the way the

startup-config.conf

file is applied. Include the

setenv-startup stop-

on-error off

command. The Zyxel Device ignores any errors in the

startup-config.conf

file and

applies all of the valid commands. The Zyxel Device still generates a log for any errors.

Figure 699

Maintenance > File Manager > Configuration File

Do not turn off the Zyxel Device while configuration file upload is in

progress.

Summary of Contents for USG110



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands

ZyXEL Communications USG110, User Manual

Search results

Summary of Contents for USG110

Reviews:

Related manuals for USG110

Brands by name

Popular brands