![background image](http://html.mh-extra.com/html/zyxel-communications/vmg5313-b10a/vmg5313-b10a_user-manual_944375088.webp)
Chapter 6 Broadband
VMG5313-B10A/-B30A Series User’s Guide
88
DHCP
option 43
Enable
This field displays when editing an existing WAN interface. Type the vender specific
information you want the VMG to add in the DHCP Offer packets. The information is used,
for example, for configuring an ACS’s (Auto Configuration Server) URL.
Static IP
Address
Select this option If the ISP assigned a fixed IP address.
IP Address
Enter the static IP address provided by your ISP.
Subnet
Mask
Enter the subnet mask provided by your ISP.
Gateway IP
Address
Enter the gateway IP address provided by your ISP.
Routing Feature (This is available only when you select
IPv4 Only
or
IPv6/IPv4 DualStack
in the
IPv6/
IPv4 Mode
field.)
NAT Enable
Select this option to activate NAT on this connection.
Full cone NAT
enable
Select this option to enable full cone NAT on this connection. This field is available only when
you activate NAT. In full cone NAT, the VMG maps all outgoing packets from an internal IP
address and port to a single IP address and port on the external network. The VMG also
maps packets coming to that external IP address and port to the internal IP address and
port.
IGMP Proxy
Enable
Internet Group Multicast Protocol (IGMP) is a network-layer protocol used to establish
membership in a Multicast group - it is not used to carry user data.
Select this option to have the VMG act as an IGMP proxy on this connection. This allows the
VMG to get subscribing information and maintain a joined member list for each multicast
group. It can reduce multicast traffic significantly.
Apply as
Default
Gateway
Select this option to have the VMG use the WAN interface of this connection as the system
default gateway.
DNS Server (This is available only when you select
IPv4 Only
or
IPv6/IPv4 DualStack
in the
IPv6/IPv4
Mode
field.)
DNS
Select
Obtain DNS Info Automically
if you want the VMG to use the DNS server
addresses assigned by your ISP.
Select
Use Following Static DNS Address
if you want the VMG to use the DNS server
addresses you configure manually.
DNS server1
Enter the first DNS server address assigned by the ISP.
DNS server 2
Enter the second DNS server address assigned by the ISP.
Tunnel (This is available only when you select
IPv4 Only
or
IPv6 Only
in the
IPv6/IPv4 Mode
field.)
The DS-Lite (Dual Stack Lite) fields display when you set the
IPv6/IPv4 Mode
field to
IPv6 Only
.
Enable Dual Stack Lite to let local computers use IPv4 through an ISP’s IPv6 network. See
for more information.
The 6RD (IPv6 rapid deployment) fields display when you set the
IPv6/IPv4 Mode
field to
IPv4 Only
. See
IPv6 Rapid Deployment on page 81
for more information.
Enable DS-Lite
This is available only when you select
IPv6 Only
in the
IPv6/IPv4 Mode
field. Select
Enable
to let local computers use IPv4 through an ISP’s IPv6 network.
DS-Lite Relay
Server IP
Specify the transition router’s IPv6 address.
Enable 6RD
This is available only when you select
IPv4 Only
in the
IPv6/IPv4 Mode
field. Select
Enable
to tunnel IPv6 traffic from the local network through the ISP’s IPv4 network.
6RD Type
Select
Static
if you have the IPv4 address of the relay server, otherwise select
DHCP
to
have the Device detect it automatically through DHCP.
Table 8
Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL
DESCRIPTION
Summary of Contents for VMG5313-B10A
