ZyXEL Communications VSG1435-B101, Quick Start Manual

6

2.  

Do one of the following for your Internet connection:

a. DSL WAN

: Use a telephone cable to connect your VSG1435-

B101’s 

DSL

 port to a telephone jack (or the DSL or modem jack on 

a splitter if you have one). 

b. ETHERNET WAN

: If you already have a broadband router or 

modem, use an Ethernet cable to connect the 

ETHERNET WAN 

port to it for Internet access.

3.  HPNA

: Use a coaxial cable to connect to a coaxial outlet and relay 

Internet traffic throughout your house through coaxial cabling. 

4.  LAN

: Use an Ethernet cable to connect a computer to a 

LAN

 port for 

initial configuration and/or Internet access.

5.  USB

: Connect a USB (version 2.0 or lower) memory stick or a USB 

hard drive for file sharing. Use a USB extension cable if the stick is 
too big to fit. 

6.  POWER

: Use the provided power adaptor to connect the 

POWER

socket to an appropriate power source. Make sure the power at the 
outlet is on. After connecting the power adaptor, look at the lights on 
the front panel.

•  The 

POWER

 light blinks while your VSG1435-B101 starts up and 

then stays on once it is ready. 

•  Each 

LAN

 light stays on if the corresponding 

LAN

 port is properly 

connected and blinks when there is traffic.

•  The 

ETHERNET

WAN

 light stays on if the 

ETHERNET

WAN

 port is 

properly connected and blinks when there is traffic.

•  The 

USB

 light turns on when your VSG1435-B101 detects a 

connected USB device.