If your broadband modem or router doesn't support MoCA, use an Ethernet cable
to connect the modem or router to a MoCA adapter and then use a coaxial cable
to connect the adapter to a coaxial outlet in your home.
The WAP7205 then automatically sets up a MoCA network with the router and can
access the Internet through the router.
ENGLISH
AC1300 Gigabit Ethernet
MoCA Extender
WAP7205
Quick Start Guide
Scenario 1 - Connect to a MoCA Router
Scenario 2 - Connect to a General Router with a MoCA Adapter
EN
If you have a MoCA router which is connected to the Internet, use a coaxial cable
to connect the router's MoCA port to a coaxial outlet in your home.
The WAP7205 then automatically sets up a MoCA network with the router and can
access the Internet through the router.
5-A
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
North America
USA
+ 1 800 255 4101
support@zyxel.com
EU Importer
Zyxel Communications A/S
Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Support Information
EN
EN
Plug the included power adapter into the
POWER
socket and then into a power
outlet.Make sure the power switch is set to the ON position.
Use an Ethernet cable to connect a
LAN
port of the WAP7205 to your computer or an
IP set-top-box.
Use a coaxial cable to connect the WAP7205's
MoCA
port to a coaxial outlet in your
home.
1
2
3
EN
5-B
See the User's Guide at www.zyxel.com for more
information, including customer support and
safety warnings.
Room 1
Room 2
Coaxial Outlet
Coaxial Outlet
Hardware Connection
MoCA
MoCA Router
MoCA Adapter
General Router
5-A
5-B
Room 1
Room 2
Coaxial Outlet
Coaxial Outlet
LAN
2
OUT
IN
The LED turns static WHITE.
around
minutes
2
4
POWER
1
Coaxial Outlet
MoCA
EN
Wait until the LED turns static WHITE (around 2 minutes).
4
WAP7205
3
POWER
2.4G/5G
MoCA
The LED turns on and then blinks white after
the device is powered on. It turns static on
again when the system is ready.
The LED turns static white when the 2.4 GHz
or 5 GHz WiFi network is enabled.
The LED turns static white when the MoCA
port is connected and the WAP7205
successfully connects (MoCA) to another
MoCA device.
POWER
ON
WAP7205
