Chapter 5 Tutorials
WRE2206 User’s Guide
32
Figure 19
Example Connection to AP using WPS: PIN Method
5.3.3 Selecting an AP from an Automatically Detected List
Follow the steps below to create a secure wireless network by selecting an AP from a list of detected
APs.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
).
1
Select an AP form the
Select
column and click
Next
.
Authentication by PIN
SECURITY INFO
WITHIN 1 MINUTE
AP
WRE2206
COMMUNICATION
51382179