Chapter 5 Tutorials
WRE2206 User’s Guide
34
5
Click
APPLY
to save settings and restart the WRE2206. Click
CONTINUE
to go to the Status
screen without saving the settings and restarting the WRE2206.
Figure 24
Tutorial: Saving settings
5.3.4 Selecting an AP by Manually Entering Security Information
This example shows you how to configure wireless security settings with the following parameters
on your WRE2206.
Follow the steps below to create a secure wireless network by manually entering the AP’s wireless
security settings in the WRE2206’s interface.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
).
1
Select
Setup repeater manually
.
2
Type the SSID of the AP into the
SSID
field and click
Next
.
Figure 25
Tutorial: Typing an SSID
SSID
ExampleSSID
Channel
7
Security
WPA2 PSK
