Chapter 11 Maintenance
WRE6505 User’s Guide
65
11.4 System Password Screen
Use this screen to set the web configurator password. Click
Maintenance
>
System
. The following
screen displays.
Figure 54
Maintenance > Password
The following table describes the labels in this screen.
11.5 Firmware Upgrade Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “WRE6505.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click
Maintenance > Firmware Upgrade
. Follow the instructions in this screen to upload
firmware to your WRE6505.
Table 31
Maintenance > System > Password
LABEL
DESCRIPTION
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the WRE6505.
Cancel
Click
Cancel
to reload the previous configuration for this screen.