Chapter 1 Introduction
WRE6606 User’s Guide
11
The following table describes the LEDs.
Table 1
Front Panel LEDs
LED
COLOR
STATUS
DESCRIPTION
Power/WPS
Green
On The
WRE6606 is receiving power and functioning properly.
This remains on for 5 minutes after a successful WPS connection
has been established.
Blinking
The WRE6606 is booting, resetting to factory defaults, the
WRE6606 is waiting for another WPS device to connect, or
firmware upgrade is in progress.
Off
The WRE6606 is not receiving power, or there is no WPS
connection established.
2.4G
Green
On
In AP mode, it means WLAN signal is detected.
Blinking
In AP mode, Client mode, and Repeater mode, it signifies data is
transmitting.
Different LED colors indicate the Wi-Fi signal strength.
•
Green: signifies a signal strength of 50% ~ 100%
•
Orange: signifies a signal strength of 21% ~ 49%
•
Red: signifies a signal strength under 20%
Off
In AP mode, Client mode, and Repeater mode, the 2.4 GHz
wireless LAN is not enabled. There is no signal detected or the
WRE6606 is not connected to a wireless router/AP, or the LEDs
are turned off using the WPS button.
5G
Green
On
In AP mode, it means WLAN signal is detected.
Blinking
In AP mode, Client mode, and Repeater mode, it signifies data is
transmitting.
Different LED colors indicate the Wi-Fi signal strength.
•
Green: signifies a signal strength of 50% ~ 100%
•
Orange: signifies a signal strength of 21% ~ 49%
•
Red: signifies a signal strength under 20%
Off
In AP mode, Client mode, and Repeater mode, the 5 GHz
wireless LAN is not enabled. There is no signal detected or the
WRE6606 is not connected to a wireless router/AP, or the LEDs
are turned off using the WPS button.
LAN
Green/
Orange
On
LAN connection is successful.
Blinking
Data is transmitting.
Off
LAN connection is off.
Different LED colors indicate the Ethernet transfer speed.
•
Green: signifies the Ethernet speed has reached 1000 Mbps.
•
Orange: signifies the Ethernet speed has reached 10/100
Mpbs.
WPS
Green
On
WPS connection has accomplished.
Blinking
WPS connection is in process.
Off
WPS connection is disabled or failed.