Chapter 13 Maintenance
WRE6606 User’s Guide
85
13.6 Firmware Upgrade Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “WRE6606.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click
Maintenance > Firmware Upgrade
. Follow the instructions in this screen to upload
firmware to your WRE6606.
User Defined Time
Server Address
Select
User Defined Time Server Address
and enter the IP address or URL (up to 20
extended ASCII characters in length) of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Time Zone Setup
Time Zone
Choose the time zone of your location. This will set the time difference between your
time zone and Greenwich Mean Time (GMT).
Daylight Savings
Daylight saving is a period from late spring to early fall when many countries set their
clocks ahead of normal local time by one hour to give more daytime light in the
evening.
Select this option if you use Daylight Saving Time.
Start Date
Configure the day and time when Daylight Saving Time starts if you selected
Daylight
Savings
. The
at
field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select
Second
,
Sunday
,
March
and
select
2
in the
at
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of
the time zones in the European Union start using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select
Last
,
Sunday
,
March
. The time you select in the
at
field depends on your time zone. In
Germany for instance, you would select 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
End Date
Configure the day and time when Daylight Saving Time ends if you selected
Daylight
Savings
. The
at
field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each
time zone in the United States stops using Daylight Saving Time at 2 A.M. local time.
So in the United States you would select
First
,
Sunday
,
November
and select 2 in the
at
field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of
the time zones in the European Union stop using Daylight Saving Time at the same
moment (1 A.M. GMT or UTC). So in the European Union you would select
Last
,
Sunday
,
October
. The time you select in the
at
field depends on your time zone. In
Germany for instance, you would select 2 because Germany's time zone is one hour
ahead of GMT or UTC (GMT+1).
Apply
Click
Apply
to save your changes back to the WRE6606.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 33
Maintenance > Time (continued)
LABEL
DESCRIPTION