WX Series User’s Guide
134
C
HA PTER
1 2
Syste m
12.1 Syste m O ve rvie w
In the
Syste m
screen, you can name your WX Device (Host) and give it an associated domain name.
Domain is the name given to a network. It will be required to reach a network from an external point
(like the Internet). Knowing the domain name will allow you to reach a particular network, and knowing
the host name will allow you to reach a particular device. For this reason, accessing a device from
another device within a network may work with just the host name (without the use of the domain
name).
12.2 Syste m Se tting s
Click
Ma inte na nc e > Syste m
to open the following screen. Assign a unique name to the WX Device so it
can be easily recognized on your network. You can use up to 30 characters, including spaces.
Fig ure 69
Maintenance > System
The following table describes the labels in this screen.
Table 37 Maintenance > System
LABEL
DESC RIPTIO N
Host Name
Type a host name for your WX Device.
Enter a descriptive name of up to 16 alphanumeric
characters, not including spaces, underscores, and dashes.
Cancel
Click
C a nc e l
to restore the default or previously saved settings.
Apply
Click
Apply
to save your changes.